Publicaciones
-
Borrero-Lopez, A.M., Valencia, C., Ibarra, D., Ballesteros, I., Franco, J.M. Lignin-enriched residues from bioethanol production: Chemical characterization, isocyanate functionalization and oil structuring properties. Int. J. Biol. Macromol., 2022, 195, 412-423.
-
Sanchez-Cid, P., Jimenez-Rosado, M., Rubio-Valle, J.F., Romero, A., Ostos, F.J., Rafii-El-Idrissi B.M., Perez-Puyana, V. Biocompatible and thermoresistant hydrogels based on collagen and chitosan, 2022, Polymers, 14, 272.
-
Ibarra, D., Martin-Sampedro, R., Wicklein, B., Borrero-Lopez, A.M., Valencia, C., Valdehita, A., Navas, J.M., Eugenio, M.E. Populus alba L., an Autochthonous Species of Spain: A source for cellulose nanofibers by chemical pretreatment. Polymers, 2022, 14, 68.
-
Diañez, I., Martinez, I., Franco, J.M., Brito-de la Fuente, E., Gallegos, C. Advances in 3D printing of food and nutritional products. Adv. Food Nutr. Res., 2022, 100, 173-210.
-
Sanchez-Cid, P., Rubio-Valle, J.F., Jimenez-Rosado, M., Perez-Puyana, V., Romero, A. Effect of solution properties in the development of cellulose derivative nanostructures processed via electrospinning. Polymers, 2022, 14, 665.
-
Borrero-Lopez, A. M., Valencia, C., Franco, J.M. Lignocellulosic materials for the production of biofuels, biochemicals and biomaterials and applications of lignocellulose-based polyurethanes: a review. Polymers, 2022, 14, 881.
-
Suffo, M., Sales, D. L., Cortes-Triviño, E., Mata, M., Jimenez, E. Characterization and production of agglomerated cork stoppers for spirits based on a factor analysis method. Food Packag. Shelf Life, 2022, 31, 100815.
-
Clemente-Castro, S., Palma, A., Ruiz-Montoya, M., Giraldez, I., Diaz, M. J. Pyrolysis kinetic, thermodynamic and product analysis of different leguminous biomasses by Kissinger-Akahira-Sunose and pyrolysis-gas chromatography-mass spectrometry. J. Anal. Appl. Pyrolysis, 2022, 162, 105457.
-
Cubero-Cardoso, J., Gomez-Villegas, P., Santos-Martin, M., Sayago, A., Fernandez-Recamales, M.A., Fernandez de Villaran, R., Cuadri, A.A.; Martin-Alfonso, J.E., Borja, R., Fermoso, F.G.; Leon, R., Urbano, J. Combining vegetable oils and bioactive compounds via inverse vulcanization for antioxidant and antimicrobial materials. Polym. Test., 2022, 109, 107546.
-
Rengel, R., Giraldez, I., Díaz, M.J., Garcia, T., Vigara, J., Leon, R. Simultaneous production of carotenoids and chemical building blocks precursors from chlorophyta microalgae. Bioresour. Technol., 2022, 351, 127035.
-
Cubero-Cardoso, J., Cuadri, A. A., Fermoso, F.G., Martin-Alfonso, J.E., Urbano, J. Promising chalcogenide hybrid copolymers for sustainable applications as bio-lubricants and metal adsorbents. ACS Appl. Polym. Mater., 2022, 4, 3667−3675.
-
Pérez-Puyana, V., Cuartero, P., Jiménez-Rosado, M., Martínez, I., Romero, A. Physical crosslinking of pea protein-based bioplastics: Effect of heat and UV treatments. Food Packag. Shelf Life, 2022, 32, 100836.
-
Ortega, F.J., Cuadri, A.A., Partal, P., Navarro, F.J. Ageing Effects on a Softened Bitumen by the Addition of DSA (Dodecenyl Succinic Anhydride) Polymers, 2022 , 14, 2437.
-
Garcia-Fuentevilla, L., Rubio-Valle, J.F., Martin-Sampedro, R., Valencia, C., Eugenio, M.E., Ibarra, D. Different Kraft lignin sources for electrospun nanostructures production: Influence of chemical structure and composition. Int. J. Biol. Macromol., 2022, 214, 554-567.
-
Cortes-Triviño, E., Cubero-Cardoso, J., Tenorio-Alfonso, A., Fernandez-Recamales, M.A., Valencia, C., Urbano, J., Franco, J. M. Structuring natural deep eutectic solvents with epoxidised lignin- enriched residues: a green alternative to petroleum-based thickened formulations. J. Mol. Liq., 2022, 360, 119433.
-
Fernandez-Silva, S.D., Delgado, M. A., Ruiz-Mendez, M. V., Giraldez, I., Garcia-Morales, M. Potential valorization of waste cooking oils into sustainable bio-lubricants. Ind. Crops Prod., 2022, 185, 115109.
-
Delgado-Sanchez, C., Partal, P., Martin-Alfonso, M.J., Navarro, F.J. Oil-in-Oil emulsions of stearic acid dispersed in silicone oil with enhanced energy storage capability for heat transfer fluids. Sol. Energy Mater. Sol. Cells, 2022, 245, 111893.
-
Martin-Alfonso, M.A., Rubio-Valle, J.F., Hinestroza, Juan P., Martin-Alfonso, J.E. Impact of vegetable oil type on the rheological and tribological behavior of montmorillonite-based oleogels. Gels, 2022, 8, 504.
-
Yuliestyan, A., Partal, P., Navarro, F.J., Martin-Sampedro, R., Ibarra, D., Eugenio, M.E. Emulsion Stabilization by cationic lignin surfactants derived from bioethanol production and kraft pulping processes. Polymers, 2022, 14, 2879.
-
Tenorio-Alfonso, A., Sánchez, M.C., Franco, J.M. Impact of the processing method on the properties of castor oil/cellulose acetate polyurethane adhesives for bonding wood. Int. J. Adhes. Adhes, 2022, 116, 103153.
-
Loaiza, J.M., Palma, A., Díaz, M.J., Ruiz-Montoya, M., García, M.T., García, J.C. Effect of autohydrolysis on hemicellulose extraction and pyrolytic hydrogen production fromEucalyptus urograndis. Biomass Convers. Biorefin., 2022, 12, 4021–4030.
- Assegehegn, G., Brito-de la Fuente, E., Franco, J.M., Gallegos, C. Understanding and optimization of the secondary drying step of a freeze-drying process: a case study. Technol., 2021, 39, 1003-1017.
- Martin-Alfonso, J.E., Martin-Alfonso, M.J., Valencia, C., Cuberes, M.T. Rheological and tribological approaches as a tool for the development of sustainable lubricating greases based on nano-montmorillonite and castor oil. Friction, 2021, 9, 415-428.
- Fernandez-Silva, S.D., Garcia-Morales, M., Ruffel, C., Delgado, M.A. Influence of the nanoclay concentration and oil viscosity on the rheological and tribological properties of nanoclay-based ecolubricants. Lubricants, 2021, 9, 8.
- Díaz, M.J., Ruiz-Montoya, M., Palma, A., de-Paz, M.V. Thermogravimetry applicability in compost and composting research: a review. Sci., 2021, 11, 1692.
- Borrero-López, A.M., Wang, L., Valencia, C., Franco, J.M., Rojas, O.J. Lignin effect in castor oil-based elastomers: Reaching new limits in rheological and cushioning behaviors. Sci. Technol., 2021, 203, 108602.
- Cuadri, A.A., Pérez-Moreno, S., Altamar, C.L., Navarro, F.J., Bolivar, J.P. Phosphogypsum as additive for foamed bitumen manufacturing used in asphalt paving. Clean. Prod., 2021, 283, 124661.
- Delgado-Sánchez, C., Cuadri, A.A., Navarro, F.J., Partal, P. Formulation and processing of novel non-aqueous polyethylene glycol-in-silicone oil (o/o) phase change emulsions. Energy Mater. Sol. Cells, 2021, 221, 110898.
- Guerra-García, J.M., Navarro-Barranco, C., Martínez-Laiz, G., Moreira, J., Giráldez, I., Morales, E., Fernández-Romero, A., Florido, M., Ros, M. Assessing environmental pollution levels in marinas. Total Environ., 2021, 762, 144169.
- Domínguez, G., Blanquez, A., Borrero-López, A.M., Valencia, C., Eugenio, M.E., Arias, M.E., Rodríguez, J., Hernández, M. Eco-friendly oleogels from functionalized kraft lignin with laccase sila from Sreptomyces ipomoeae: an opportunity to replace commercial lubricants. ACS Sustain. Chem. Eng., 2021, 9, 4611-4616.
- Palma, A., Loaiza, J.M., Díaz, M.J., García, J.C., Giráldez, I., López, F. Tagasaste, leucaena and paulownia: three industrial crops for energy and hemicelluloses production. Biofuels, 2021, 14, 89.
- Loaiza, J.M., Zamudio, M.A., Lozano, S., Alfaro, A., García, M.T., García, J.C., López, F. Characterization and usage of tule (Typha domingensis Pers) to obtain cellulose pulp in a biorefinery framework. Bioresources, 2021, 16, 3328-3347.
- Ibarra, D., Martin-Sampedro, R., Jiménez-López, L., Martín, J.A., Díaz, M.J. Eugenio, M.E. Obtaining fermentable sugars from a highly productive elm clone using different pretreatments. Energies, 2021, 14, 2415.
- Guerra-García, J.M., Navarro-Barranco, C., Ros, M., Sedano, F., Espinar, R., Fernández-Romero, A., Martínez-Laiz, G., Cuesta, J.A., Giráldez, I., Morales, E., Florido, M., Moreira, J. Ecological quality assessement of marinas: An integrative approach combining biological and environmental data. J. Environ. Manage., 2021, 286, 112237.
- Romero-Hermida, M.I., Borrero-López, A.M., Flores-Ales, V., Alejandre, F.J., Franco, J.M., Santos, A., Esquivias, L. Characterization and analysis of the carbonation process of a lime mortar obtained from phosphogypsum waste. J. Environ. Res. Public Health, 2021, 18, 6664.
- Borrego, M., Martin-Alfonso, J.E., Sánchez, M.C., Valencia, C., Franco, J.M. Electrospun lignin-PVP nanofibers and their ability for structuring oil. J. Biol. Macromol., 2021, 180, 212-221.
- Sangroniz, L., Fernández, M., Partal, P., Santamaria, A. Rheology of polymer processing in spain (1995-2020). Polymers, 2021, 13, 2314.
- Rubio-Valle, J.F., Sánchez, M.C., Valencia, C., Martín-Alfonso, J.E., Franco, J.M. Electrohydrodynamic processing of pvp-doped kraft lignin micro- and nano-structures and application of electrospun nanofiber templates to produce oleogels. Polymers, 2021, 13, 2206.
- Álvarez-Barajas, R., Cuadri, A.A., Navarro, F.J., Martínez-Boza, F.J., Partal, P. Bioethanol production and alkali pulp processes as sources of anionic lignin surfactants. Polymers, 2021, 13, 2703.
- Palma, A., Díaz, M.J., Ruiz-Montoya, M., Morales, E., Giráldez, I. Ultrasound extraction optimization for bioactive molecules from Eucalyptus globulus leaves through antioxidant activity. Sonochem., 2021, 76, 105654.
- Cortes-Triviño, E., Valencia, C., Franco, J.M. Thickening castor oil with a lignin-enriched fraction from sugarcane bagasse waste via epoxidation: a rheological and hydrodynamic approach. ACS Sustain. Chem. Eng., 2021, 9, 10503-10512.
- Borrero-López, A.M., Guzmán, D.B., González-Delgado, J.A., Arteaga, J.F., Valencia, C., Pischel, U., Franco, J.M. Toward UV-triggered curing of solvent-free polyurethane adhesives based on castor oil. ACS Sustain. Chem. Eng., 2021, 9, 11032-11040.
- Eugenio, M.E., Ruiz-Montoya, M., Martin-Sampedro, R., Ibarra, D., Díaz, M.J. Influence of cellulose characteristics on pyrolysis suitability. Processes, 2021, 9, 1584.
- Martín-Alfonso, M.J., Loaiza, J.M., Delgado-Sánchez, C., Martínez-Boza, F.J. Influence of formate concentration on the rheology and thermal degradation of xanthan gum. Polymers, 2021, 13, 3378.
- León-Vaz, A., León, R., Giráldez, I., Vega, J.M., Vigara, J. Impact of heavy metals in the microalga Chlorella sorokiniana and assessment of its potential use in cadmium bioremediation. Toxicol., 2021, 239, 105941.
- Martín-Alfonso, M.J., Mejia, A., Martinez-Boza, F.J., Martín-Alfonso, J.E. Rheological characterization of sepiolite-vegetable oil suspensions at high pressures. Clay Sci., 2021, 212, 106220.
- Roman, C., García-Morales, M., Eugenio, M.E., Ibarra, D., Martin-Sampedro, R., Delgado, M.A. A sustainable methanol-based solvent exchange method to produce nanocellulose-based ecofriendly lubricants. Clean. Prod., 2021, 319, 128673.
- Martín-Alfonso, M.J., Pozo, J., Delgado-Sánchez, C., Martínez-Boza, F.J. Thermal and rheological properties of hydrophobic nanosilica in sunflower oil suspensions at high pressures. Nanomaterials, 2021, 11, 3037.
- Fernández-Silva, S.D., Delgado, M.A., Roman, C., García-Morales, M. Rheological and tribological properties of nanocellulose-based ecolubricants. Nanomaterials, 2021, 11, 2987.
- Borrero-López, A.M., Valencia, C., Dominguez, G., Eugenio, M.E., Franco, J.M. Rheology and adhesion performance of adhesives formulated with lignins from agricultural waste straws subjected to solid-state fermentation. Crop. Prod., 2021, 171, 113876.
- Diañez, I., Gallegos, C., Brito-de la Fuente, E., Martínez, I., Valencia, C., Sánchez, M.C., Franco, J.M. Implementation of a novel continuous solid/liquid mixing accessory for 3D printing of dysphagia-oriented thickened fluids. Food Hydrocoll., 2021, 120, 106900.
- Delgado-Sánchez, C., Partal, P., Martín-Alfonso, M.J., Navarro, F.J. Role of crystallinity on the thermal and viscous behaviour of polyethylene glycol-in-silicone oil (o/o) phase change emulsions. Ind. Eng. Chem., 2021, 103, 348-357.
- Felix, M., Martínez, I., Sayago, A., Recamales, M.A.F. Wine lees: From waste to O/W emulsion stabilizer. Food Sci. Emerg. Technol., 2021, 74, 102810.
- Tenorio-Alfonso, A., Sánchez, M.C., Franco, J.M. Impact of moisture curing conditions on the chemical structure and rheological and ultimate adhesion properties of polyurethane adhesives based on castor oil and cellulose acetate., Prog, Org. Coat., 2021, 161, 106547.
1. Gallego, R., Piras, C.C., Rutgeerts, L.A.J., Fernandez-Prieto, S., De Borggraeve, W.M., Franco, J.M., Smets, J. Green approach for the activation and functionalization of jute fibers through ball milling. Cellulose, 2020, 27, 643-656.
2. Cuadri, A.A., Martin-Alfonso, J.E., Urbano, J. Using Mathcad to facilitate the design of chemical reactors involving multiple reactions. Comput. Appl. Eng. Educ., 2020, 28, 293-303.
3. García, E., Giraldez, I., Ruiz-Montoya, M.R., Morales, E. Determination of booster biocides in sediments by focused ultrasound-assisted extraction and stir bar sorptive extraction-thermal desorption-gas chromatography-mass spectrometry. Microchem. J., 2020, 152, 104445.
4. Assegehegn, G., Brito-de la Fuente, E., Franco, J.M., Gallegos, C. An experimental-based approach to construct the process design space (PDS) of a freeze-drying process: an effective tool to design an optimum and robust freeze-drying process for pharmaceuticals. J. Pharm. Sci., 2020, 109, 785-796.
5. Loaiza, J.M., Alfaro, A., Lopez, F., Garcia, M.T., Garcia, J.C. Integral use of Eucalyptus globulus in a double stage biorefinery scheme. Maderas-Ciencia y Tecnología, 2020, 1, 93-108.
6. Assegehegn, G., Brito-de la Fuente, E., Franco, J.M., Gallegos, C. Freeze-drying: A relevant unit operation in the manufacture of foods, nutritional products, and pharmaceuticals. Adv. Food Nutr. Res., 2020, 93,1-58.
7. Tenorio-Alfonso, A., Sánchez, M.C., Franco, J.M. A review of the sustainable approaches in the production of bio-based polyurethanes and their applications in the adhesive field. J. Polym. Environ., 2020, 28, 749-774.
8. Cuadri, A.A., Navarro, F. J., Partal, P. Synergistic ethylcellulose/polyphosphoric acid modification of bitumen for paving applications. Mater. Struct., 2020, 53, 6.
9. Acar, N., Franco, J.M., Kuhn, E., Gonçalves, D.P., Seabra, J.H.O. Tribological investigation on the friction and wear behaviors of biogenic lubricating greases in steel–steel contact. Appl. Sci., 10, 2020, 1477.
10. Cuadri, A.A., Delgado-Sanchez, C., Navarro, F. J., Partal, P. Short- and long-term epoxy modification of bitumen: modification kinetics, rheological properties, and microstructure. Polymers, 2020, 12, 508.
11. Ruiz-Montoya, M.R., Giraldez, I., Morales, E., Estevez-Brito, R., Rodríguez Mellado, J. M. Electrochemical oxidation of isothiazolinone biocides and their interaction with cysteine. Electrocim. Acta, 2020, 337, 135770.
12. Vazquez, M., Moreno-Ventas, I., Raposo, I., Palma, A., Diaz, M. J. Kinetic evolution of chalcopyrite thermal degradation under oxidative environment. Mining. Metall. Explor., 2020, 37, 923-932.
13. Assegehegn, G., Brito-de la Fuente, E., Franco, J.M., Gallegos, C. Use of a temperature ramp approach (TRA) to design an optimum and robust freeze-drying process for pharmaceutical formulations. Int. J. Pharm., 2020, 578, 119116.
14. Acar, N., Franco, J.M., Kuhn, E. On the shear-induced structural degradation of lubricating greases and associated activation energy: an experimental rheological study. Tribol. Int., 2020, 144, 106105.
15. Roman, C., Delgado, M. A., Garcia-Morales, M. Fatigue performance evaluation of bitumen mastics reinforced with polyolefins through a dissipated energy approach. Materiales de Construcción, 2020, 70, e217.
16. Roman, C., Garcia-Morales, M., Olariu, M. A., McNally, T. Effect of selective distribution of MWCNTs on the solid-state rheological and dielectric properties of blends of PMMA and LDPE. J. Mater. Sci., 2020, 55, 8526-8540.
17. Reinoso, D.; Martin-Alfonso, M.J., Luckham, P.F., Martinez-Boza, F.J. Flow behavior and thermal resistance of xanthan gum in formate brine. J. Petrol. Sci. Eng., 2020, 188, 106881.
18. Roman C., García-Morales M. On the integration of Mathcad capabilities into a mass transfer operations course in Chemical Engineering studies, Comput. Appl. Eng. Educ., 2020, 28, 938-951.
19. Delgado, M.A., Cortes-Triviño, E., Valencia, C., Franco, J.M. Tribological study of epoxide-functionalized alkali lignin-based gel-like biogreases. Tribol. Int., 2020, 146, 106231.
20. Diañez, I., Martinez, I., Gómez, P.A. Effect of plasticiser on the morphology, mechanical properties and permeability of albumen-based nanobiocomposites. Food Packag. Shelf Life, 2020, 24, 100499.
21. Salamanca, N., Morales, E., Ruiz-Azcona, P., Herrera, M. Endocrine and metabolic effects of Trp-enriched diets for attenuation of chronic stress in the Senegal soles (Solea senegalensis). Aquaculture, 2020, 523, 735173.
22. Martín-Alfonso, J.E., Martín-Alfonso, M.J., Franco, J.M. Tunable rheological-tribological performance of “green” gel-like dispersions based on sepiolite and castor oil for lubricant applications. Appl. Clay Sci., 2020, 192, 105632.
23. Roman C., Delgado, M.A., García-Morales M. Using process simulators in Chemical Engineering education: Is it possible to minimize the «black box» effect? , Comput. Appl. Eng. Educ., 2020, 28, 1369-1385.
24. Vázquez, M., Moreno-Ventas, I., Raposo, I., Palma, A., Díaz, M.J. Kinetic of pyrite thermal degradation under oxidative environment. J. Therm. Anal. Calorim., 2020, 141, 1157-1163.
25. Palma, A., Dona-Grimaldi, V.M., Ruiz-Montoya, M., Giraldez, I., García, J.C., Loaiza, J.M., Lopez, F., Díaz, M.J. MSW compost valorization by pyrolysis: influence of composting process parameters. ACS Omega, 2020, 5, 20810-20816.
26. Delgado, M.A., Fernandez-Silva, S.D., Roman, C., Garcia-Morales, M. On the electro-active control of nanocellulose-based functional biolubricants. ACS Appl. Mater. Interfaces. 2020, 12, 46490-46500.
27. Borrero-López, A.M., Martin-Sampedro, R., Ibarra, D., Valencia, C., Eugenio, M.E., Franco, J.M. Evaluation of lignin-enriched side-streams from different biomass conversion processes as thickeners in bio-lubricant formulations. Int. J. Biol. Macromol., 2020, 162, 1398-1413.
28. Alonso-Gonzalez, M., Corral-Gonzalez, A., Felix, M., Romero, A., Martin-Alfonso, J.E. Developing active poly(vinyl alcohol)-based membranes with encapsulated antimicrobial enzymes via electrospinning for food packaging. Int. J. Biol. Macromol., 2020, 162, 913-921.
29. Borrero-López, Valencia, C., Franco, J.M. Green and facile procedure for the preparation of liquid and gel-like polyurethanes based on castor oil and lignin: effect of processing conditions on the rheological properties. J. Clean. Prod., 2020, 277, 123367.
30. Borrero-López, Valencia, C., Blánquez, A., Hernández, M., Eugenio, M.E., Franco, J.M. Cellulose pulp- and castor oil-based polyurethanes for lubricating applications: influence of Streptomyces action on barley and wheat straws. Polymers, 2020, 12, 2822.
31. Iglesias, N., Galbis, E., Valencia, C., Diaz-Blanco, M.J., Lacroix, B., de-Paz, M.V. Biodegradable double cross-linked chitosan hydrogels for drug delivery: Impact of chemistry on rheological and pharmacological performance. Int. J. Biol. Macromol., 2020, 165, 2205-2218.
1. Reinoso, D.; Martin-Alfonso, M.J., Luckham, P.F., Martinez-Boza, F.J. Rheological characterisation of xanthan gum in brine solutions at high temperature. Carbohydr. Polym., 2019, 203, 103-109.
2. Romero-Hermida, M.I., Borrero-López, A.M., Alejandre, F.J., Flores-Alés, V., Santos, A., Franco, J.M., Esquivias, L. Phosphogypsum waste lime as a promising substitute of commercial limes: A rheological approach. Cement Concrete Comp., 2019, 95, 205-2016.
3. Iglesias, N., Galbis, E., Diaz-Blanco, M.J., Lucas, R., Benito, E., de-Paz, M.V. Nanostructured chitosan-based biomaterials for sustained and colon-specific resveratrol release. Int. J. Molec. Sci., 2019, 20, 398.
4. Diañez, I., Gallegos, C., Brito-de la Fuente, E., Martínez, I., Valencia, C., Sánchez, M.C., Diaz-Blanco, M.J., Franco, J.M. 3D printing in situ gelification of κ-carrageenan solutions: Effect of printing variables on the rheological response. Food Hydrocoll. 2019, 87, 321-330.
5. Martín-Alfonso, J.E., Urbano, J.,. Cuadri, A.A, Franco, J.M. The combined effect of H 2 O 2 and light emitting diodes (LED) process assisted by TiO 2 on the photooxidation behaviour of PLA. Polym. Test., 2019, 73, 268-275.
6. Delgado, M.A., Secouard, S., Valencia, C., Franco, J.M. On the steady-state flow and yielding behaviour of lubricating greases. Fluids, 2019, 4, 6.
7. Loaiza, J.M., Alfaro, A., López, F., García, M.T., García, J.C. Optimization of laccase/mediator system (LMS) stage applied in fractionation of Eucalyptus globulus. Polymers, 2019, 11, 731.
8. Assegehegn, G., Brito-de la Fuente, E., Franco, J.M., Gallegos C. The importance of understanding the freezing step and its impact on freeze drying process performance. J. Pharm. Sci., 2019,108, 1378-1395.
9. Martin-Alfonso, J.E., Cuadri, A.A., Torres, J., Hidalgo, M. E., Partal, P. Use of plastic wastes from greenhouse in asphalt mixes manufactured by dry process. Road Mater. Pavement Des., 2019, 20, S265-S281.
10. Estevez Brito, R., Priego Capote, F., Ledesma Escobar, C.A., Ruiz Montoya, M., Rodríguez Mellado, J.M. Electrochemical oxidation pathways of hydroxycoumarins on carbon electrodes examined by LSCV and LC-MS/MS. J. Electrochem. Soc., 2019, 166, H331-H335.
11. Dona-Grimaldi, V.M., Palma, A., Ruiz-Montoya, M., Morales, E., Diaz, M.J. Energetic valorization of MSW compost valorization by selecting the maturity conditions. J. Environ. Manag., 2019, 238, 153-158.
12. García, M.T., Zamudio, M.A.M., Loaiza, J.M., Morales, A.B., Alfaro, A., Lopez, F., García, J.C. Characterization and use of southern cattail for biorefining-based production of furfural. Biomass Convers. Biorefinery, 2019, 9, 333-339.
13. Herrera, M., Miro, J.M., Giraldez, I., Salamanca, N., Martos-Sitcha, J.A., Mancera, J.M., Lopez, J.R. Metabolic and stress responses in senegalese soles (Solea senegalensis Kaup) fed tryptophan supplements: effects of concentration and feeding period. Animals, 2019, 9, 6.
14. Cuadri, A.A., Martin-Alfonso, J.E., Urbano, J. A teaching methodology based on Mathcad for improving the calculation of pumping power. Educ. Chem. Eng., 2019, 28, 68-78.
15. Martin-Alfonso, J.E., Cikova, E., Omastova, M. Development and characterization of composite fibers based on tragacanth gum and polyvinylpyrrolidone. Composites B-Eng., 2019, 169, 79-87.
16. Loaiza, J.M., Colodette, J.L., García, J.C., Lopez, F. Autohydrolysis, pulping, and bleaching of Eucalyptus urograndis in a biorefinery framework. Bioresources, 2019, 14, 5467-5487.
17. García, M.C., Muñoz, J., Alfaro, M.C., Franco J.M. Formulation variables influencing the properties and physical stability of green multiple emulsions stabilized with a copolymer. Colloid Polym. Sci., 2019, 297, 1095–1104.
18. Martin-Alfonso, J.E., Cuadri, A.A., Franco J.M. Development and characterization of novel fibers based on potato protein/polyethylene oxide through electrospinning. Fiber. Polym., 2019, 20, 1586-1593.
19. Ortega, F.J., Navarro, F.J., Jasso, M., Zanzotto, L. Physicochemical softening of a bituminous binder by a reactive surfactant (dodecenyl succinic anhydride, DSA). Const. Build. Mater., 2019, 222, 766-775.
20. Iglesias, N., Galbis, E., Romero-Azogil, L., Benito, E., Diaz-Blanco, M.J., Garcia-Martin, M.G., de-Paz, M.V. Experimental model design: exploration and optimization of customized polymerization conditions for the preparation of targeted smart materials by the Diels Alder click reaction. Polym. Chem., 2019, 10, 5473-5486.
21. Ambrosi, M., Raudino, M., Diañez, I., Martínez, I. Non-isothermal crystallization kinetics and morphology of poly(3-hydroxybutyrate)/pluronic blends. Eur. Polym. J., 2019, 120, 109189.
22. Borrero-López, A.M., Blánquez, A., Valencia, C., Hernández, M., Arias, M.E., Franco, J.M. Influence of solid-state fermentation with Streptomyces on the ability of wheat and barley straws to thicken castor oil for lubricating purposes. Ind. Crops Prod., 2019, 140, 111625.
23. Senise, S., Carrera, V., Cuadri, A.A., Navarro, F.J., Partal, P. Hybrid rubberised bitumen from reactive and non-reactive ethylene copolymers. Polymers, 2019, 11, 12.
24. Tenorio-Alfonso, A., Sánchez, M.C., Franco, J.M. Synthesis and mechanical properties of bio-sourced polyurethane adhesives obtained from castor oil and MDI-modified cellulose acetate: influence of cellulose acetate modification. Int. J. Adhes. Adhes, 2019, 95, 102404.
25. Cortes-Triviño, E., Valencia, C., Delgado, M.A., Franco J.M. Thermo-rheological and tribological properties of novel bio-lubricating greases thickened with epoxidized lignocellulosic materials. J. Ind. Eng. Chem., 2019, 80, 626–632.
26. Roman C., García-Morales M. Achieving a better understanding of binary azeotropic mixtures distillation through Aspen Plus process simulations, Comput. Appl. Eng. Educ., 2019, 27, 1453–1464.
27. Domínguez-Robles J., del Valle Palenzuela M., Sánchez R., Loaiza J.M., Espinosa E., Rosal A., Rodríguez A. Coagulation-flocculation as an alternative way to reduce the toxicity of the black liquor from the paper industry: thermal valorization of the solid biomass recovered. Waste Biomass Valorization, 2019, 1-12.
28. Vázquez M., Moreno-Ventas I., Raposo I., Palma A., Díaz M.J. Kinetic of pyrite thermal degradation under oxidative environment. J. Therm. Anal. Calorim. 2019, 12-03, 1-7.
29. Jiménez-Rosado, M., Zarate-Ramírez, L.S., Romero, A., Bengoechea, C. Partal, P., Guerrero, A. Bioplastics based on wheat gluten processed by extrusion. J. Clean. Prod., 2019, 239, 117994.
- Fillat, U. Wicklein, B., Martin-Sampedro, R., Ibarra, D., Ruiz-Hitzky, E., Valencia, C, Sarrion, A.; Castro, E., Eugenio, M.E. Assessing cellulose nanofiber production from olive tree pruning residue. Carbohydr. Polym. 2018, 179, 252-261.
- Yuliestyan, A., Cuadri, A.A., Garcia-Morales, M., Partal P. Selection of ethylene-vinyl-acetate properties for modified bitumen with enhanced end-performance. Rheol. Acta 2018, 57, 71-82.
- Martin-Alfonso, J.E., Cuadri, A.A., Berta, M., Stading, M. Relation between concentration and shear-extensional rheology properties of xanthan and guar gum solutions. Carbohydr. Polym. 2018, 181, 63-70.
- Tenorio-Alfonso, A., Pizarro, M.L., Sanchez, M.C., Franco, J.M. Assessing the rheological properties and adhesion performance on different substrates of a novel green polyurethane based on castor oil and cellulose acetate: A comparison with commercial adhesives. Int. J. Adhes. Adhes., 2018, 82, 21-26.
- Borrero-López, A.M., Blánquez, A., Valencia, C., Hernández, M., Arias, M., Eugenio, M.E., Fillat, U., Franco, J.M. Valorization of soda lignin from wheat straw solid-state fermentation: production of oleogels. ACS Sustain. Chem. Eng., 2018, 6, 5198−5205.
- Raghunanan, L.C., Fernández-Prieto, S., Martínez, I., Valencia, C., Sánchez, M.C., Franco, J.M. Molecular insights into the mechanisms of humidity-induced changes on the bulk performance of model castor oil derived polyurethane adhesives. Eur. Polym. J., 2018, 101, 291-303.
- Iglesias, N., Galbis, E., Valencia, C.,de-Paz, M.V., Galbis, J.A. Reversible pH-sensitive chitosan-based hydrogels. Influence of dispersion composition on rheological properties and sustained drug delivery. Polymers, 2018, 10, 392.
- Cuadri, A. A.; Martin-Alfonso, J. E. Thermal, thermo-oxidative and thermomechanical degradation of PLA: A comparative study based on rheological, chemical and thermal properties. Polym. Degrad. Stabil., 2018, 150, 37-45.
- Roman, C., Garcia-Morales, M. Comparative assessment of the effect of micro- and nano- fillers on the microstructure and linear viscoelasticity of polyethylene-bitumen mastics. Const. Build. Mater., 2018, 169, 83-92.
- Raghunanan, L.C., Martínez, I., Valencia, C., Sánchez, M.C., Franco, J.M. Unexpected selectivity in the functionalization of neat castor oil under benign catalyst-free conditions. ACS Sustain. Chem. Eng., 2018, 6, 7212−7215.
- Acar, N., Kuhn, E., Franco, J.M. Tribological and rheological characterization of new completely biogenic lubricating greases: a comparative experimental investigation. Lubricants, 2018, 6, 45.
- Borrero-López, A.M., Santiago-Medina, J.F., Valencia, C., Eugenio, M.E., Martin-Sampedro, R., Franco, J.M. Valorization of Kraft lignin as thickener in castor oil for lubricant applications. J. Renew. Mater., 2018, 6, 347-361.
- Cortes-Triviño, E., Valencia, C. Delgado, M.A., Franco, J.M. Modification of alkali lignin with poly(ethylene glycol) diglycidyl ether to be used as a thickener in bio-lubricant formulations. Polymers, 2018, 10, 670.
- Martin-Alfonso, J.E., Cuadri, A.A., Greiner, A. The combined effect of formulation and pH on properties of polyethylene oxide composite fiber containing egg albumen protein. Int. J. Biol. Macromol., 2018, 112, 996-1004.
- Loaiza, J.M., Lopez, F., Garcia, M.T., Garcia, J.C., Diaz, M.J. Integral valorization of tagasaste (Chamaecytisus proliferus) under thermochemical processes. Biomass Convers. Bior., 2018, 8, 265-274.
- Yuliestyan, A., Gabet, T., Marsac, P.,Garcia-Morales, M., Partal P. Sustainable asphalt mixes manufactured with reclaimed asphalt and modified-lignin-stabilized bitumen emulsions. Const. Build. Mater., 2018, 173, 662-671.
- Cortes-Triviño, E., Martínez, I. Wheat gluten/montmorillonite biocomposites: Effect of pH on the mechanical properties and clay dispersion. Exp. Polym Lett., 2018, 12, 616-627.
- Roman, C., Garcia-Morales, M., Goswami, S., Marques, A.C., Cidade, M. T. The electrorheological performance of polyaniline-based hybrid particles suspensions in silicone oil: influence of the dispersing medium viscosity. Smart Mater. Struct., 2018, 27, 075001.
- Cuadri, A.A., Romero, A., Bengoechea, C., Guerrero, A. The effect of carboxyl group content on water uptake capacity and tensile properties of functionalized soy protein-based superabsorbent plastics. J. Polym. Environ., 2018, 26, 2934-2944.
- Martín-Alfonso, J.E., López-Beltrán, F., Valencia, C., Franco, J.M. Effect of an alkali treatment on the development of cellulose pulp-based gel-like dispersions in vegetable oil for use as lubricants. Tribol. Int., 2018, 123, 329–336.
- Rivas Romero, M.P., Estévez Brito, R., Rodríguez Mellado, J.M., Gonzalez Rodríguez, J., Ruiz Montoya, M., Rodriguez-Amaro, R., Exploring the relation between composition of extracts of healthy foods and their antioxidant capacities determined by electrochemical and spectrophotometrical methods. LWT-Food Sci. Technol., 2018, 95, 157-166.
- Felix, M., Martínez, I., Aguilar, J.M., Guerrero, A. Development of biocomposite superabsorbent nanomaterials: effect of processing technique. J. Polym. Environ., 2018, 26, 4013-4018.
- Santiago-Medina, F.J., Tenorio-Alfonso, A., Delgado-Sánchez, C., Basso, M.C., Pizzi, A., Celzard, A., Fierro, V., Sánchez, M.C., Franco, J.M. Projectable tannin foams by mechanical and chemical expansion. Ind. Crops Prod., 2018, 120, 90-96.
- Santan, H.D., James, C., Fratini, E., Martínez, I., Valencia, C., Sánchez, M.C., Franco, J.M. Structure-property relationships in solvent free adhesives derived from castor oil. Ind. Crops Prod., 2018, 121, 90-98.
- Iglesias, N., Galbis, E., Diaz-Blanco, M.J., de-Paz, M.V., Galbis, J.A. Loading studies of the anticancer drug camptothecin into dual stimuli-sensitive nanoparticles. Stability scrutiny. Int. J. Pharm., 2018, 550, 429-438.
- Cortes-Triviño, E., Valencia, C. Delgado, M.A., Franco, J.M. Rheology of epoxidized cellulose pulp gel-like dispersions in castor oil: influence of epoxidation degree and the epoxide chemical structure. Carbohydr. Polym., 2018, 199, 563-571.
- Estévez Brito, R., Rodríguez Mellado, J.M., Ruiz Montoya, M., Palma, A., Rodríguez-Amaro, R., Mayén, M. Spectroscopic determination of the dissociation constants of 2,4- and 2,5-dihydroxybenzaldehydes and relation to their antioxidant activities. Comptes Rendus Chimie, 2017, 20, 365-369.
- Rivas Romero, M.P., Estévez Brito, R., Palma, A., Ruiz Montoya, M., Rodríguez Mellado, J.M., Rodríguez-Amaro, R. An electrochemical method for the determination of antioxidant capacities applied to components of spices and condiments. J. Electrochem. Soc. 2017, 164, B97-B102.
- Roman, C., Garcia-Morales, M. Linear rheology of bituminous mastics modified with various polyolefins: a comparative study with their source binders. Mater. Struct. 2017, 50, 86.
- Hermoso, J., Martínez-Boza, F.J., Gallegos, C. Organoclay influence on high pressure-high temperature volumetric properties of oil-based drilling fluids. J. Petrol. Sci. Eng. 2017, 151, 13-23.
- Borrero-Lopez, A.M., Valencia, C., Franco, J.M. Rheology of lignin-based chemical oleogels prepared using diisocyanate crosslinkers: Effect of the diisocyanate and curing kinetics. Eur. Polym. J. 2017, 89, 311-323.
- Tenorio-Alfonso, A., Sanchez, M.C., Franco, J.M. Preparation, characterization and mechanical properties of bio-based polyurethane adhesives from isocyanate-functionalized cellulose acetate and castor oil for bonding wood. Polymers, 2017, 9, 132.
- Cuadri, A.A., Romero, A., Bengoechea, C., Guerrero, A. Natural superabsorbent plastic materials based on a functionalized soy protein. Polym. Test. 2017, 58, 126-134.
- Ortega, F.J., Navarro, F.J., Garcia-Morales, M., McNally, T. Effect of shear processing on the linear viscoelastic behaviour and microstructure of bitumen/montmorillonite/MDI ternary composites. J. Ind. Eng. Chem. 2017, 48, 212-223.
- Ortega, F.J., Navarro, F.J., Garcia-Morales, M. Dodecylbenzenesulfonic acid as a bitumen modifier: a novel approach to enhance rheological properties of bitumen. Energy Fuels, 2017, 31, 5003-5010.
- Delgado, M.A., Quinchia, L.A., Spikes, H.A., Gallegos, C. Suitability of ethyl cellulose as multifunctional additive for blends of vegetable oil-based lubricants. J. Clean. Prod. 2017, 151, 1-9.
- García, M.C., Muñoz, J., Alfaro, M.C., Franco, J.M. Optimization of green multiple emulsions processing to improve their physical stability. Chem. Eng. Technol. 2017, 40, 1043-1050.
- Roman, C., Garcia-Morales, M., Gupta, J., McNally, T. On the phase affinity of multi-walled carbon nanotubes in PMMA:LDPE immiscible polymer blends. Polymer, 2017, 118, 1-11.
- Cuadri, A.A., Martin-Alfonso, J.E. The effect of thermal and thermo-oxidative degradation conditions on rheological, chemical and thermal properties of HDPE. Polym. Degrad. Stabil. 2017, 141, 11-18.
- Palma, A., Ruiz Montoya, M., Diaz, M.J., Arteaga, J.F., Estévez Brito, R., Rodríguez Mellado, J.M., Rodríguez-Amaro, R. Evaluation of synergistic and antagonistic effects between some selected antioxidants by means of an electrochemical technique. Int. J. Food Sci. Technol. 2017, 52, 1639-1644.
- Estévez Brito, R., Gonzalez Rodríguez, J., Ruiz Montoya, M., Rodríguez Mellado, J.M. Comparison of the volatile antioxidant contents in the aqueous and methanolic extracts of a set of commercial spices and condiments. Eur. Food Res. Technol. 2017, 243, 1439-1445.
- Hermoso, J., Martínez-Boza, F.J., Gallegos, C. Modeling pressure-viscosity behavior of oil-based drilling fluids. Oil Gas Sci. Technol. 2017, 72(4), 18.
- Loaiza, J.M., López. F., García, M.T., García, J.C., Díaz. M.J. Biomass valorization by using a sequence of acid hydrolysis and pyrolysis processes. Application to Leucaena leucocephala. Fuel, 2017, 203, 393-402.
- Cortes-Trivino, E., Valencia, C., Franco, J.M. Influence of epoxidation conditions on the rheological properties of gel-like dispersions of epoxidized Kraft lignin in castor oil. Holzforschung, 2017, 71, 777-784.
- Yuliestyan, A., Garcia-Morales, M., Moreno, E., Carrera, V., Partal P. Assessment of modified lignin cationic emulsifier for bitumen emulsions used in road paving. Mater. Design, 2017, 131, 242-251.
- Pereira, O., Martin-Alfonso, J. E., Rodriguez, A., Fernandez-Valdivielso, A., Lopez de Lacalle, L. N. Sustainability analysis of lubricant oils for minimum quantity lubrication based on their tribo-rheological performance. J. Clean. Prod. 2017, 164, 1419-1429.
- Gomez-Heincke, D., Martinez, I., Stading, M., Gallegos, C. Partal, P. Improvement of mechanical and water absorption properties of plant protein based bioplastics. Food Hydrocoll. 2017, 73, 21-29.
- Dominguez, M.T., Madejon, P., Madejon, E., Diaz, M.J. Novel energy crops for Mediterranean contaminated lands: Valorization of Dittrichia viscosa and Silybum marianum biomass by pyrolysis. Chemosphere, 2017, 186, 968-976.
- Diañez, I., Martinez, I.; Partal, P. Synergistic effect of combined nanoparticles to elaborate exfoliated egg-white protein-based nano-biocomposites. Compos. B: Eng. 2016, 88, 36-43.
- Perez, J.P., Martinez-Boza, F. J., Partal, P. Stability assessment of non-aqueous polymer dispersions through viscous flow and linear viscoelastic rheological tests. Polym. Test. 2016, 50, 164-171.
- Yuliestyan, A.; Cuadri, A. A.; Garcia-Morales, M.; Partal P. Influence of polymer melting point and melt flow index on the performance of ethylene-vinyl-acetate modified bitumen for reduced-temperature application. Mater. Design, 2016, 96, 180-188.
- Gallego, R., Cidade, M.T., Sánchez, R., Valencia, C., Franco, J.M. Tribological behaviour of novel chemically modified biopolymer-thickened lubricating greases investigated in a steel-steel rotating ball-on-three plates tribology cell. Tribol. Int. 2016, 94, 652-660.
- Brewer, D.R., Franco, J.M., García-Zapateiro, L.A. Rheological properties of oil-in-water emulsions prepared with oil and protein isolates from sesame (Sesamum Indicum). Food Sci. Technol. 2016, 36, 64-69.
- González, M., Gallego, R., Romero, M.A., González-Delgado, J.A., Arteaga J.F., Valencia, C., Franco, J.M. Impact of natural sources-derived antioxidants on the oxidative stability and rheological properties of castor oil based-lubricating greases. Ind. Crops Prod. 2016, 87, 297–303.
- García, M.C., Muñoz, J., Alfaro, M.C., Franco, J.M. Influence of processing on the physical stability of multiple emulsions containing a green solvent. Chem. Eng. Technol. 2016, 39, 1137–1143.
- Ortega, F.J., Roman, C., Navarro, F. J., García-Morales, M., Mcnally, T. Physico-chemistry control of the linear viscoelastic behaviour of bitumen/montmorillonite/MDI ternary composites: Effect of the modification sequence. Fuel Process. Technol. 2016, 143, 195-203.
- Roman, C. Valencia, C.;Franco, J. M. AFM and SEM assessment of lubricating grease microstructures: influence of sample preparation protocol, frictional working conditions and composition. Tribol. Letters, 2016, 63, 20.
- Gomez-Heincke, D., Martinez, I., Partal, P., Guerrero, A., Gallegos, C. Development of antimicrobial active packaging materials based on gluten proteins. J. Sci. Food Agric. 2016, 96, 3432-3438.
- Yuliestyan, A., Cuadri, A. A., Garcia-Morales, M., Partal P. Binder design for asphalt mixes with reduced temperature: EVA modified bitumen and its emulsions. Transp. Res. Procedia, 2016, 14, 3512-3518.
- Roman, C., Cuadri, A.A., Liashenko, I., Garcia-Morales, M., Partal P. Linear and non-linear viscoelastic behavior of SBS and LDPE modified bituminous mastics. Constr. Build. Mater. 2016, 123, 464-472.
- Roman, C., Garcia-Morales, M. Optical microscopy visualization on droplet relaxation and breakup in a LDPE modified bitumen. Mater. Design, 2016, 107, 353-360.
- Lopez-Castejon, L.M., Bengoechea, C., Garcia-Morales, M., Martinez, I. Influence of tragacanth gum in egg white based bioplastics: Thermomechanical and water uptake properties. Carbohydr. Polym. 2016, 152, 62-69.
- Cuadri, A.A., Roman, C., Garcia-Morales, M., Guisado, F., Moreno, E., Partal P. Formulation and processing of recycled-low-density-polyethylene-modified bitumen emulsions for reduced-temperature asphalt technologies. Chem. Eng. Sci. 2016, 156, 197-205.
- Portela, R., Patrício, P., Almeida, P., Sobral, R.G., Franco, J.M., Leal, C.R. Rotational tumbling of Escherichia coli aggregates under shear. Phys. Rev. E, 2016, 94, 062402.
- Cuadri, A.A., Bengoechea, C., Romero, A., Guerrero, A. A natural-based polymeric hydrogel based on functionalized soy protein. Eur. Polym. J. 2016, 85, 164-174.
- Granda, L.A. Espinach, X., López, F., García, J.C., Delgado-Aguilar, M, Mutjé, P. Semichemicalfibres of Leucaenacolinsii reinforced polypropylene: Macromechanical and micromechanical analysis. Compos. B: Eng. 2016, 91, 384-391.
- Madejón-Rodríguez, P.; Domínguez-Núñez, Mª Teresa; Díaz. M.J.; Madejón-Rodríguez, E. Improving sustainability in the remediation of contaminated soils by the use of compost and energy valorization by Paulownia fortune. Sci. Total Environ. 2016, 539, 401-409.
- López-Núñez, R.; Giráldez-Díaz, I.; Palma-López, A.; Díaz. M.J. Assessment of compost maturity by using an electronic nose. Waste Manag. 2016, 48, 174-180.
- Loaiza, J.M., López. F., García-Domínguez, M.T., Fernandez, O., Díaz. M.J., García-Domínguez, J.C. Selecting the pre-hydrolysis conditions for eucalyptus wood in a fractional exploitation biorefining scheme. J. Wood Chem. Technol. 2016, 36, 211-223.
- López, F., Feria, M.J., García, J.C., García, M.T., Díaz, M.J. Biorefinering of Leucaena leucocephala: energy optimization of the black liquor and polysaccharide fractions. Cellulose Chem. Technol. 2016, 50 , 1005-1014.
- Estévez Brito, R., Rodríguez Mellado, J.M., Palma, A., Ruiz Montoya, M., Rodríguez-Amaro, R., Mayén, M. A contribution on the elucidation of the electrooxidation mechanism of gentisaldehyde on a glassy carbon electrode. J. Electrochem. Soc. 2016, 163, H1127-H1131.
- Hermoso, J., Martínez-Boza, F.J., Gallegos, C. Influence of aqueous phase volume fraction, organoclay concentration and pressure on invert-emulsion oil muds rheology. J. Ind. Eng. Chem. 2015, 22, 341-349.
- Martín-Alfonso, J.E., Franco, J.M. Formulation and characterization of oleogels based on high-oleic sunflower oil and ethylene vinyl acetate copolymer/polypropylene blends. Polym. Eng. Sci. 2015, 55, 1429-1440.
- Gallego, R., Arteaga, J.F., Valencia, C., Franco J.M. Thickening properties of several NCO-functionalized cellulose derivatives in castor oil. Chem. Eng. Sci. 2015, 134, 260-268.
- Martín-Alfonso, J.E., Franco, J.M. Influence of polymer reprocessing cycles on the microstructure and rheological behavior of polypropylene/mineral oil oleogels Polym. Test. 2015, 45, 12-19.
- Sánchez, R., Alonso, G., Valencia, C., Franco, J.M. Rheological and TGA study of acylated chitosan gel-like dispersions in castor oil: influence of acyl substituent and acylation protocol. Chem. Eng. Res. Des. 2015, 100, 170-178.
- Gallego, R., Arteaga, J.F., Valencia, C., Díaz, M.J., Franco J.M. Gel-like dispersions of HMDI-crosslinked lignocellulosic materials in castor oil: towards completely renewable lubricating grease formulations. ACS Sustain. Chem. Eng. 2015, 3, 2130-2141.
- Fiedler, M., Sanchez, R., Valencia, C., Leopold, C.S., Kuhn, E., Franco J.M. Influence of base oil polarity on the transient shear flow of biodegradable lubricating greases. Lubricants, 2015, 3, 611-627.
- Quintana, S.E., Franco, J.M., García-Zapateiro, L.A. Physico-chemical and bromatological characteristics of arenca and rheological properties of oil-in-water emulsions containing isolated protein. Cienc. Agrotec. 2015, 39, 634-641.
- Carrera, V., Cuadri A.A., Garcia-Morales M., Partal P. The development of polyurethane modified bitumen emulsions for cold mix applications. Mater. Struct. 2015, 48, 3407-3414.
- Cuadri A.A., Partal P., Ahmad, N., Grenfell, J., Airey, G. Chemically modified bitumens with enhanced rheology and adhesion properties to siliceous aggregates. Const. Build. Mater. 2015, 93, 766-774.
- Ortega, F.J., Navarro, F. J., García-Morales, M., Mcnally, T. Thermo-mechanical behaviour and structure of novel bitumen/nanoclay/MDI composites. Compos. B: Eng. 2015, 76, 192-200.
- Martin-Alfonso, J. E., Valencia, C. Linear and nonlinear viscoelasticity of oleogels based on vegetable oil and ethylene vinyl acetate copolymer/isotactic polypropylene blends. J. Appl. Polym. Sci. 2015, 132, 42477.
- Martin-Alfonso, J. E., Valencia, C. Tribological, rheological, and microstructural characterization of oleogels based on EVA copolymer and vegetables oils for lubricant applications. Tribol. Int. 2015, 90, 426-434.
- Lopez-Castejon, M.L., Bengoechea, C., Garcia-Morales, M., Martinez, I. Effect of plasticizer and storage conditions on thermomechanical properties of albumen/tragacanth based bioplastics. Food Bioprod. Process. 2015, 95, 264-271.
- Felix, M., Romero, A., Martin-Alfonso, J.E., Guerrero, A. Development of crayfish protein-PCL biocomposite material processed by injection moulding. Compos. B: Eng. 2015, 78, 291-297.
- Zamudio, M.A.M., Alfaro, A., de Alva, H.E., García, J.C., García-Morales, M., J.E. Lopez, F. Biorefinery of paulownia by autohydrolysis and soda-anthraquinone delignification process: Characterization and application of lignin. J. Chem. Technol. Biotechnol. 2015, 90, 534-542.
- García-Fuentevilla, L., Martín-Sampedro, R., Carbajo, J.M., Díaz. M.J., Eugenio-Martin, M.E. Enhancement of TCF and ECF bleaching processes by urea and enzymatic pretreatments optimization of a laccase-mediator pretreatment. Bioresources, 2015, 10, 2289-2304.
- Martin-Sampedro, R., Miranda, J., García-Fuentevilla, L., Hernández, M., Arias, M.E., Díaz. M.J., Eugenio, M.E. Influence of process variables on the properties of laccase-biobleached pulps. Bioprocess Biosyst. Eng. 2015, 38, 113-123.
- García-Domínguez, M.T., García-Domínguez, J.C., López. F., De Diego, C.M., Díaz. M.J. Maximizing furfural concentration from wheat straw and Eucalyptus globulus by nonisothermal autohydrolysis. Environ. Prog. Sustain. Energy, 2015, 34, 1236-1242.
- López, F., García, M.T., Mena, V., Loaiza, J.M., Zamudio M.A.M., García J.C. Can acceptable pulp be obtained from eucalyptus globulus wood chips after hemicellulose extraction? Bioresources, 2015, 10, 55-67.
- Diaz-Ocampo, R., Sánchez, R., Franco, J.M. Rheology of commercial and model borojo jam formulations. Int. J. Food Prop. 2014, 17, 791-805.
- Martín-Alfonso, J.E., Valencia, C., Franco, J.M. Composition-property relationship of gel-like dispersions based on organo-bentonite, recycled polypropylene and mineral oil for lubricant purposes. Appl. Clay Sci. 2014, 87, 265–271.
- Sánchez, R., Valencia, C., Franco, J.M. Rheological and tribological characterization of a new acylated chitosan-based biodegradable lubricating grease: a comparative study with traditional lithium and calcium greases. Tribol. Trans. 2014, 57, 445-454.
- García-Zapateiro, L.A., Valencia, C., Franco, J.M. Formulation of lubricating greases from renewable basestocks and thickener agents: a rheological approach. Ind. Crops Prod. 2014, 54, 115-121.
- Martín-Alfonso, J.E., Franco, J.M. Ethylene-vinyl acetate copolymer (EVA)/sunflower vegetable oil polymer gels: Influence of vinyl acetate content. Polym. Test. 2014, 37, 78-85.
- Gallego, R., González, M., Arteaga, J.F., Valencia, C., Franco J.M. Influence of functionalization degree on the rheological properties of isocyanate-functionalized chitin- and chitosan-based chemical oleogels for lubricant applications. Polymers, 2014, 6, 1929-1947.
- García, M.C., Muñoz, J., Alfaro, M.C., Franco, J.M. Physical characterization of multiple emulsions formulated with a green solvent and different HLB block copolymers. Colloid Surface A, 2014, 458, 40-47.
- Delgado, M.A., García-Rico, C., Franco, J.M. The use of rosemary extracts in vegetable oil-based lubricants. Ind. Crops Prod. 2014, 62, 474–480.
- Cuadri, A.A., Garcia-Morales, M., Navarro, F.J., Partal, P. Processing of bitumens modified by a bio-oil-derived polyurethane. Fuel, 2014, 118, 83-90.
- Zárate-Ramírez, L.S., Romero, A., Martínez, I., Bengoechea, C., Partal, P., Guerrero A. Effect of aldehydes on thermomechanical properties of gluten-based bioplastics. Food Bioprod. Process. 2014, 92, 20-29.
- Cuadri, A.A., Garcia-Morales, M., Navarro, F.J., Partal, P. Effect of transesterification degree and post-treatment on the in-service performance of NCO-functionalized vegetable oil bituminous products. Chem. Eng. Sci. 2014, 111, 126-134.
- Carrera V., Cuadri, A.A., Garcia-Morales, M., F.J.; Partal, P. Influence of the prepolymer molecular weight and free isocyanate content on the rheology of polyurethane modified bitumens. Eur. Polym. J. 2014, 57, 151-159.
- Zárate-Ramírez, L.S., Romero, A., Bengoechea, C., Partal, P., Guerrero A. Thermo-mechanical and hydrophilic properties of polysaccharide/gluten-based bioplastics. Carbohydr. Polym. 2014, 112, 24-31.
- Hermoso, J., Martínez-Boza, F.J., Gallegos, C. Influence of viscosity modifier nature and concentration on the viscous flow behaviour of oil-based drilling fluids at high pressure. Appl. Clay Sci. 2014, 87, 14-21.
- Izquierdo, M.A., Navarro, F.J., Martínez-Boza, F.J., Gallegos, C. Structure–property relationships in the development of bituminous foams from MDI based prepolymers. Rheol. Acta, 2014, 53, 123-131.
- Izquierdo, M.A., García-Morales, M., Martínez-Boza, F.J., Navarro, F.J. Thermo-mechanical properties and microstructural considerations of MDI isocyanate-based bituminous foams. Mater. Chem. Phys. 2014, 146, 261-268.
- Hermoso, J., Martínez-Boza, F.J., Gallegos, C. Combined effect of pressure and temperature on the viscous behaviour of all-oil drilling fluids. Oil Gas Sci. Technol. 2014, 69, 1283-1296.
- Cuadri, A.A.; Navarro, F.J.; Garcia-Morales, M.; Bolívar, J. P. Valorization of phosphogypsum waste as asphaltic bitumen modifier. J. Hazard. Mater. 2014, 279, 11-16.
- Galbis, E; De Paz, M.V.; Mcguinness, K.L.; Angulo, M; Valencia, C.; Galbis, J.A. Tandem ATRP/Diels-Alder synthesis of polyHEMA-based hydrogels. Polym. Chem. 2014, 5, 5391-5402.
- Quinchia, L.A.; Delgado, M.A.; Reddyhoff, T.; Gallegos, C.; Spikes, H. Tribological studies of potential vegetable oil-based lubricants containing environmentally friendly viscosity modifiers. Tribol. Int. 2014, 69, 110-117.
- Cuadri, A.A., Carrera, V., Izquierdo, M., García-Morales, M., Navarro, F.J. Bitumen modifiers for reduced temperature asphalts: a comparative analysis between three polymeric and non-polymeric additives. Const. Build. Mater. 2014, 51, 82-88.
- Felix, M., Martin-Alfonso, J.E., Romero, A., Guerrero, A. Development of albumen/soy biobased plastic materials processed by injection molding. J. Food Eng. 2014, 125, 7-16.
- Martin-Alfonso, J.E., Felix, M., Romero, A., Guerrero, A. Development of new albumen based biocomposites formulations by injection moulding using chitosan as physicochemical modifier additive. Compos. B: Eng. 2014, 61, 275-281.
- De Carvalho, D.M., Pérez-Muñoz, A., García-Domínguez, J.C., Colodette, J. L., López. F., Díaz. M.J. Ethanol-soda pulping of sugarcane bagasse and straw. Cellulose Chem. Technol. 2014, 48, 355-364.
- Tejada-Moral, M., Gómez-Parrales, I.A., Fernández-Boy, M.E., Díaz. M.J. Effects of sewage sludge and acacia dealbata composts on soil biochemical and chemical properties. Commun. Soil Sci. Plant. Anal. 2014, 45, 570-580.
- López. F., García-Domínguez, M.T., Feria-Infante, M.J., García-Domínguez, J.C., De Diego, C.M., Zamudio-Aguilar, M.A.M., Díaz. M.J. Optimization of furfural production by acid hydrolysis of Eucalyptus globulus in two stages. Chem. Eng. J. 2014, 240, 195-201.
- Palma, A., Ruiz Montoya, M., Arteaga J. F., Rodríguez Mellado, J. M. Determination of antioxidant activity of spices and their active principles by differential pulse voltammetry. J. Agric. Food Chem. 2014, 62, 582−589.
- Estévez Brito, R., Rodríguez Mellado, J.M., Maldonado, P., Ruiz Montoya, M., Palma A., Morales, E. Elucidation of the electrochemical oxidation mechanism of the antioxidant sesamol on a glassy carbon electrode. J. Electrochem. Soc. 2014, 161, G27-G32.
- Estévez Brito, R., Rodríguez Mellado, J.M., Palma A., Ruiz Montoya, M., Fernández Arteaga, J. Mechanism of mercury electrooxidation in the presence of hydrogen peroxide and antioxidants. J. Electrochem. Soc. 2014, 161, H854-H859.
- Martín-Alfonso, J.E., Valencia, C., Arteaga, J.F., Díaz, M.J., Franco J.M. Design of lubricating grease formulations using recycled polypropylene from post-consumer films as thickener agent. J. Appl. Polym. Sci. 2013, 127, 1369-1376.
- Gallego, R., Arteaga, J.F., Valencia, C., Franco J.M. Chemical modification of methyl cellulose with HMDI to modulate the thickening properties in castor oil. Cellulose, 2013, 20, 495-507.
- Martín-Alfonso, J.E., Romero, A., Valencia, C., Franco J.M. Formulation and processing of virgin and recycled polyolefin/oil blends for the development of lubricating greases. J. Ind. Eng. Chem. 2013, 19, 580-588.
- Ruiz-Márquez, D., Partal, P., Franco, J.M., Gallegos C. Linear viscoelastic behaviour of oil-in-water food emulsions stabilized by tuna-protein isolates. Food Sci. Technol. Int. 2013, 19, 3-10.
- Batista, A.P., Gouveia, L., Bandarra, N.M., Franco, J.M., Raymundo A. Comparison of microalgal biomass profiles as novel functional ingredient for food products. Algal Res. 2013, 2, 164-173.
- Martín-Alfonso, J.E., Valencia, C., Sánchez, M.C., Franco J.M., Gallegos C. The effect of recycled polymer addition on the thermorheological behavior of modified lubricating greases. Polym. Eng. Sci. 2013, 53, 818-826.
- Martín-Alfonso, J.E., Valencia, C., Franco J.M. Effect of amorphous/recycled polypropylene ratio on thermo-mechanical properties of blends for lubricant applications. Polym. Test. 2013, 32, 516-524.
- García-Zapateiro, L.A., Franco, J.M., Valencia, C., Delgado, M.A., Gallegos C. Viscous, thermal and tribological characterization of oleic and ricinoleic acids-derived estolides and their blends with vegetable oils. J. Ind. Eng. Chem. 2013, 19, 1289–1298.
- Gallego, R., Arteaga, J.F., Valencia, C., Franco J.M. Isocyanate-functionalized chitin and chitosan as gelling agents of castor oil. Molecules, 2013, 18, 6532-6549.
- Fiedler, M., Sanchez, R., Kuhn, E., Franco J.M. Influence of oil polarity and material combination on the tribological response of greases formulated with biodegradable oils and bentonite and highly-dispersed silica acid. Lubr. Sci. 2013, 25, 397–412.
- García-Zapateiro, L.A., Franco, J.M., Valencia, C., Delgado, M.A., Gallegos C., Ruiz-Méndez, M.V. Viscosity modification of high-oleic sunflower and castor oils with acid oils-derived estolides for lubricant applications. Eur. J. Lipid Sci. Technol. 2013, 115, 1173-1182.
- Gallego, R., Arteaga, J.F., Valencia, C., Franco J.M. Rheology and thermal degradation of isocyanate-functionalized methyl cellulose-based oleogels. Carbohydr. Polym. 2013, 98, 152-160.
- García-Zapateiro, L.A., Franco, J.M., Valencia, C., Delgado, M.A., Gallegos C., Ruiz-Méndez, M.V. Chemical, thermal and viscous characterization of high-oleic sunflower and olive pomace acid oils and derived estolides. Grasas Aceites, 2013, 64, 497-508.
- Gómez-Martínez, D., Partal, P., Martínez, I., Gallegos C. Gluten-based bioplastics with modified controlled-release and hydrophilic properties. Ind. Crops Prod. 2013, 43, 704-710.
- Cuadri, A.A., Garcia-Morales, M.; Navarro, F.J., Airey, G.D., Partal, P. End-performance evaluation of thiourea-modified bituminous binders through viscous flow and linear viscoelasticy testing. Rheol. Acta, 2013, 52, 145-154.
- Cock, F., Cuadri, A.A., Garcia-Morales, M., Partal, P. Thermal, rheological and microstructural characterisation of commercial biodegradable polyesters. Polym. Test. 2013, 32, 716-723.
- Cuadri, A. A., Garcia-Morales, M.; Navarro, F.J.; Partal, P. Isocyanate-functionalized castor oil as a novel bitumen modifier. Chem. Eng. Sci. 2013, 97, 320-327.
- Martinez, I.; Partal, P.; Garcia-Morales, M.; Guerrero, A.; Gallegos, C. Development of protein-based bioplastics with antimicrobial activity by thermo-mechanical processing. J. Food Eng. 2013, 117, 247-254.
- Izquierdo, M.A., Navarro, F.J., Martínez-Boza, F.J., Gallegos, C. Effect of MDI-PPG molecular weight on the thermorheological behaviour of MDI-isocyanate based bituminous foams. J. Ind. Eng. Chem. 2013, 19, 704-711.
- Giráldez-Díaz, I., Ruiz-Montoya, M., Delgado-Rodriguez, M., Díaz-Blanco, M.J. Optimization of thermal desorption conditions for volatile organic compounds emitted in municipal solid waste storage under SBSE-TD-GC-MS. J. Residuals Sci. Technol. 2013, 10, 107-116.
- Cabeza-Rojas, I.O., López-Núñez, R., Giráldez-Díaz, I., Stuetz, R.M., Díaz. M.J. Biofiltration of α-pinenevapours using municipal solid waste (MSW) – pruning residues (P) composts as packing materials. Chem. Eng. J. 2013, 233, 149-158.
- Cabeza-Rojas, I.O., López-Núñez, R., Ruiz-Montoya, M., Díaz. M.J. Maximising municipal solid waste – Legume trimming residue mixture degradation in composting by control parameters optimization. J. Environ. Manag. 2013, 128, 266–273.
- Fernández-Arteaga, J., Díaz-Blanco, M. J., Toscano-Fuentes, C. M., Martin-Alfonso, J.E. Implementation of a cooperative methodology to develop organic Chemical Engineering skills. Eur. J. Eng. Educ. 2013, 38, 370-384.
- García-Domínguez, M.T., García-Domínguez, J.C., Feria-Infante, M.J., Gómez-lozano, D.M., Lopez-Baldovín, F., Díaz. M.J. Furfural production from Eucalyptus globulus optimizing by using neural fuzzy models. Chem. Eng. J. 2013, 221, 185-192.
- Palma, A., Ruiz Montoya, M., Arteaga J. F., Rodríguez Mellado, J. M. Analysis of the interaction of radical scavengers with ROS electrogenerated from hydrogen peroxide. J. Electrochem. Soc. 2013, 160, H213- H218.
- Ruiz Montoya, M., Mayén, M., Rodríguez-Amaro, R., Rodríguez Mellado, J. M. Electrochemical behaviour of 3,5,6-trichloro-4-methyl-pyridine-2-carboxylic acid on mercury and carbon electrodes. Electrochim. Acta, 2013, 102, 72-78.
- García-Domínguez, J.C., Díaz. M.J., García-Domínguez, M.T., Feria-Infante, M.J., Gómez, D.M., López. F. Search for optimum conditions of wheat straw hemicelluloses cold alkaline extraction process. Biochem. Eng. J. 2013, 71, 127-133.
- Alfaro, A., López, F., Pérez, A., García, J.C., Pèlach, M.A., Mutjé, P. Influence of the operating conditions in the sodium hydroxide and anthraquinone pulping on the morphology of cellulose fibers of tagasaste. Cellulose Chem. Technol. 2013, 47, 765-775.
- Feria, M.J., García, J.C., Za,mudio, M.A.M., Gomide, J.L., Colodette, J.L., López, F. Kraft pulping and bleaching from Paulownia sun tzu 104© wood. Cellulose Chem. Technol. 2013, 47, 595-601.
- Quinchia, L.A., Delgado, M.A., Franco, J.M., Spikes, H.A., Gallegos, C. Low-temperature flow behaviour of vegetable oil-based lubricants. Ind. Crops Prod. 2012, 37, 383-388.
- Núñez, N., Martín-Alfonso, J.E., Valencia, C., Sánchez, M.C., Franco, J.M. Rheology of new green lubricating grease formulations containing cellulose pulp and its methylated derivative as thickener agents. Ind. Crops Prod. 2012, 37, 500-507.
- Batista, A.P., Nunes, M.C., Fradinho, P., Gouveia, L., Sousa, I., Raymundo, A., Franco, J.M. Novel foods with microalgal ingredients – effect of gel setting conditions on the linear viscoelasticity of Spirulina and Haematococcus gels. J. Food. Eng. 2012, 110,182-189.
- Moreno, G., de Paz, M.V., Valencia, C., Franco, J.M. Synthesis and characterization of isocyanate-functionalized PVA-based polymers with applications as new additives in lubricant formulations. J. Appl. Polym. Sci., 2012, 125, 3259-3267.
- Martín-Alfonso, J.E., Valencia, C., Sánchez, M.C., Franco, J.M. Evaluation of thermal and rheological properties of lubricating greases modified with recycled LDPE. Tribol. Trans. 2012, 55, 518-528.
- Martín-Alfonso, J.E., Valencia, C., Sánchez, M.C., Franco, J.M., Gallegos. C. Influence of some processing variables on the rheological properties of lithium lubricating greases modified with recycled polymers. Int. J. Mat. Prod. Technol. 2012, 43, 184-200.
- Núñez, N., Martín-Alfonso, J.E., Eugenio, M. E., Valencia, C., Díaz, M.J., Franco, J.M. Influence of Eucalyptus globulus Kraft pulping severity on the rheological properties of gel-like cellulose pulp dispersions in castor oil. Ind. Eng. Chem. Res. 2012, 51, 9777-9782.
- Gallegos, C., Valencia, C., Partal, P., Franco, J.M., Maglio, O., Abrahamson, M., Brito de la Fuente, E. Droplet-size distribution and stability of commercial injectable lipid emulsions containing fish oil. Am. J. Health-Sys. Pharm. 2012, 69, 1332-1335.
- Brito de la Fuente, E., Staudinger-Prevost, N., Quinchia, L.A., Valencia, C., Partal, P., Franco, J.M., Gallegos, C. Design of a new spoon-thick consistency oral nutrition supplement using rheological similarity with a swallow barium test feed. Appl. Rheol. 2012, 22, 53365.
- Fuentes, C., Martínez-Boza, F. J., Navarro, F. J., Partal, P., Gallegos, C. Formulation of new synthetic binders: thermo-mechanical properties of resin/recycled polymer blends. Polym. Eng. Sci. 2012, 52, 242-249.
- Shivokhin, M.; Garcia-Morales, M., P. Partal, Caudri A.A., Gallegos C. Rheological behaviour of polymer-modified bituminous mastics: A comparative analysis between physical and chemical modification. Constr. Build. Mater. 2012, 27, 234-240.
- Cuadri A. A.; García-Morales; M., Navarro F. J.; Partal P. Enhancing the viscoelastic properties of bituminous binders via thiourea-modification. Fuel, 2012, 97, 862-868.
- Hermoso, J., Jofore, B.D., Martínez-Boza, F.J., Gallegos, C. High pressure mixing rheology of drilling fluids. Ind. Eng. Chem. Res. 2012, 51, 14399-14407.
- Izquierdo, M.A., Navarro, F.J., Martínez-Boza, F.J., Gallegos, C. Bituminous polyurethane foams for building applications: Influence of bitumen hardness. Const. Build. Mater. 2012, 30, 706-703.
- González, V., Martínez-Boza, F.J., Gallegos, C., Pérez-Lepe, A., Páez, A. A study into the processing of bitumen modified with tire crumb rubber and polymeric additives. Fuel Process. Technol. 2012, 95, 137-143.
- Feria, M.J., García, J.C., Pérez, A., Gomide, J.L., Colodette, J.L., López, F. Process optimization in kraft pulping, bleaching and beating of Leucaenadiversifolia. Bioresources, 2012, 7, 283-297.
- Feria, M.J., Alfaro, A., López, F., Pérez, A., García, J.C., Rivera, A. Integral valorization of Leucaenadiversifolia by hydrothermal and pulp processing. Bioresour. Technol. 2012, 103, 381-388.
- Pintado, S., Ruiz Montoya, M., Rodríguez-Amaro, R., Mayén, M., Rodríguez Mellado, J.M. Electrochemical determination of glyphosate in waters using electrogenerated copper ions. Int. J. Electrochem. Sci. 2012, 7, 2523-2530.
- Fernández Arteaga, J., Ruiz Montoya, M., Palma, A., Garrido, G. A., Pintado, S., Rodríguez Mellado, J. M. Comparison of the simple cyclic voltammetry (CV) and DPPH assays for the determination of antioxidant capacity of active principles. Molecules, 2012, 17, 5126-5138.
- Pintado, S., Ruiz Montoya, M., Rodríguez Mellado, J. M. Electroreduction mechanism of 8-quinolinecarboxylic acid and the herbicide quinmerac on mercury electrodes. Electrochim. Acta, 2012, 74, 87-92.
- López, F., Pérez, A., Zamudio, M.A.M., De Alva, H.E., García, J.C. Paulownia as raw material for solid biofuel and cellulose pulp. Biomass Bioenergy, 2012, 45, 77-86.
- Díaz, M.J., Eugenio, M.E., López, F., García, J.C., Yáñez, R. Neural models for optimizing lignocellulosic residues composting process. Waste, Biomass Valorization, 2012, 3, 240-247.
- Martín-Sampedro, R., Eugenio, M.E., García, J.C., López, F., Villar, J.C., Díaz, M.J. Steam explosion and enzymatic pre-treatments as an approach to improve the enzymatic hydrolysis of Eucalyptus globulus. Biomass Bioenergy, 2012, 42, 97-106.
- Delgado, M., Ruiz-Montoya, M., Giraldez, I., López, R., Madejón, E., Díaz, M.J. Use of electronic nose, GC-MS in detection, monitoring some VOC. Atmos. Environ. 2012, 51, 1352-2310.
- Feria, M.J., García, J.C., Díaz, M.J., Fernández, M., López F. Biorefinery process for production of paper, oligomers from Leucaena leucocephala K360 with or without prior autohydrolysis. Bioresour. Technol. 2012, 126, 64-70.
- Feria, M.J., García, J.C., Díaz, M.J., Garrote, G., López, F. Optimization the soda-AQ process for cellulose pulp production, energy content of black liquor from L. leucocephala K360. Bioresour. Technol. 2012, 120, 173-179.
- Delgado, M., Ruiz-Montoya, M., Giraldez, I., López, R., Madejón, E., Díaz, M.J. Effect of aeration rate, moisture content on the emissions of selected VOCs during municipal solid waste composting. J. Mater. Cycle Waste Manag. 2012, 14, 369–378.
Patentes
Inventores: J.E. Martín-Alfonso, C. Valencia, J.M. Franco
Título: Compuesto biodegradable para su uso como grasa lubricante y procedimiento para su obtención.
N de patente: ES2802877 / WO2021/009396 A
Fecha de concesión: 21/01/2021
1. Inventores: S. Fernández-Prieto, J.M. Franco, E. Fratini, C. James, I. Martínez, D.G. O’Sullivan, G. Saini, H.D. Santan, J. Smets, R. Vyas
Título: Gels comprising a hydrophobic material
Número de patente: WO2019/016707, US 2019/0022264 A1/US 2019/0022265A1
Fecha de concesión: 24/01/2019
2. Inventores: S. Fernández-Prieto, J.M. Franco, I. Martínez, L.C. Raghunanan, G.M. Frankenbach
Título: Adhesives derived from castor oil
Número de patente: EP3453729
Fecha de concesión: 13/03/2019
- Inventores: C. Gallegos, E. Brito de la Fuente, J. Mainou, L.A. Quinchia, M. Jozami, C. Valencia, J.M. Franco
Título: Compositions for dysphagia assessment
Número de patente: EP 2825064 (US201261611053; WO2013135737)
Fecha de concesión: 21/01/2015 - Inventores: A.A. Cuadri, F. J. Navarro, M. García-Morales, F. J. Martínez Boza, P. Partal
Título: Procedimiento de espumación-modificación conjunta de betunes para su uso en pavimentación
Número de patente: ES 2516566 (WO2014177734)
Fecha de concesión: 12/05/2015 - Inventores: L.A. García-Zapateiro, C. Valencia, M.A: Delgado, C. Gallegos, J.M. Franco
Título: Grasas biodegradables y procedimiento de obtención de las mismas a partir de oleínas residuales
Número de patente: ES 2525892
Fecha de concesión: 23/06/2015 - Inventores: J.C. García– Domínguez, J.L. Colodette, F.López, M.J. Díaz
Título: Sistema de fraccionamiento de biomasa lignocelulósica en frío
Número de patente: ES 2405298
Fecha de concesión: 17/02/2015
- Inventores: M T García, F. J. Martínez , I. Martínez, C. Gallegos, P. Partal; F.J. Martínez-Boza; F.J. Navarro, García-Morales, M., R. Ayllón
Título: Proceso para la obtención de un mástico bituminoso modificado para aplicación en caliente y producto obtenido
Número de patente: ES 2388022
Fecha de concesión: 06/06/2013 - Inventores: S. Gil, F.J. Martínez-Boza, F.J. Navarro, P. Partal, C. Gallegos, J.J. Potti, J.L. Peña, D: Peinado, J.J. García, F.J. Suárez, J.M. Martínez
Título: Dispositivo para la medida de propiedades de fluencia en procesos de compactación de mezclas sólido-fluido
Número de patente: ES 2395017
Fecha de concesión: 29/11/2013 - Inventores: F. J. Martínez-Boza, J. Hermoso, A. Illana, J.A: Carmona
Título: Dispositivo para la medida de propiedades reológicas y seguimiento de procesos a presión
Número de patente: ES2388846 (WO2012127078)
Fecha de concesión: 23/05/2013
- Inventores: P. Partal, F.J. Navarro, M. García-Morales, F.J. Martínez-Boza, C. Gallegos, I. Martínez, V. Carrera, A.A. Cuadri
Título: Ligante bituminoso para reciclado de pavimentos
Número de patente: ES 2375125
Fecha de concesión: 27/11/2012 - Inventores: L. Quinchia, M.A: Delgado, J.M. Franco, C. Valencia, C. Gallegos
Título: Etilcelulosa como agente modificador de la viscosidad de aceites vegetales para su uso como lubricantes biodegradables
Número de patente: ES 2372344
Fecha de concesión: 16/11/2012